|Table tee slots
|Max load of table||400||600||800||kg|
|X/Y/Z Rapid speed||30/30/30||30/30/30||30/30/24||m/min|
to table center
|Taper of spindle||NO.40||NO.40||NO.40
|Tool magazine type||刀臂式||刀臂式||刀臂式|
|Max.weight of tool||7||7||7/15||kg|
|Max.dia of tool||Φ75||Φ75||Φ75/Φ110||mm|
|Max.length of tool||250||250||250/300||mm|
|NC system||According to customer demand matching|
|Weight of machine||4200||6200||7500||kg|
Note: 1. When the standard configuration spindle is a powerful NO.40 spindle, it can be equipped with 10000/12000/15000rpm.
2. For higher torque output in the low speed range, please select the double winding spindle servo motor.
1. With the help of finite element analysis technology, the mechanical strength has increased by more than 50%.
2. The ultra-standard column and base, and the heavy body design significantly improve the rigidity of the machine.
3. Using the Hanmina casting process, plus heat flow balance, aging treatment, etc., the accuracy of the machine tool is effectively improved.
4. The guide rail adopts the German Rexroth (REXR0TH) powerful heavy-duty linear guide rail, which has stronger heavy load capacity and better precision retention.
5. The feed axis uses the absolute value servo device, which eliminates the startup and zero return operation, improves the control precision and enhances the servo gain.
6. High-strength spindle and high-torque drive ensure the stability of machine tool processing.
7. The tool magazine uses a knife-arm type knot, and the tool exchange is faster.
8. Direct-coupled high-torque feed shaft drive unit with higher operating efficiency and control accuracy.
9. Screw pre-tensioning and hot spot compensation, better processing and retention.
10. Scalability: Optional 4th/5th axis, powerful center water outlet and other devices to expand the application field of machine tools.
11. Complete automation equipment: It can be combined with HANFENG’s WFR series industrial robots into an automatic machining unit.