First, the machining of iron parts in CNC machining centers is good for hard rails or good for rails.
Iron parts are relatively common workpieces. Many customers will ask if the machining center is not used in the machining center to process the iron parts. Is the “Cnc machining center machining iron parts good or hard?” This question is indeed a winding many pairs of CNC. The problem of unfamiliar customers in the machining center is solved by Taicheng CNC today.
Before analyzing the specific hard track or the track, first of all, as a CNC machining center manufacturer, you must ask what the iron parts the customer wants to process, how big the size is, whether it is finishing or roughing, etc. Without knowing these details, even a manufacturer specializing in the production of CNC machining centers cannot give an accurate answer. Generally speaking, the iron parts that we often say are relatively large workpieces. Of course, we do not rule out special cases. Then we will use larger iron parts.
The large-sized iron parts are of high quality, and the cutting amount is generally large. In this case, the hard rail is most suitable, the hard rail has good rigidity, strong earthquake resistance and strong bearing capacity, and is suitable for heavy-duty cutting. If you use a wire CNC machining center, it is not very good, and even damage the rail. The rail is likely to be deformed due to the inability to withstand heavy-duty cutting. Therefore, when customers have special requirements, our CNC machining center manufacturers generally recommend customers to use hard-track CNC machining centers, and the same type of CNC machining center hard rails are cheaper than the line rails, and the CNC machining centers with large strokes are like The VMC1270 and so on are all optional without line rails, because these large-stroke CNC machining centers are generally used for heavy-duty cutting.
Second, the CNC machining center hard track is better than the line rail
In the above, there are also some mentions of the advantages of the hard rail, high rigidity, good shock resistance and strong load-bearing capacity. These advantages come from the structure of the hard rail. The hard-track CNC machining center is a CNC machining center with the guide rail and the bed body integrated, that is, The guide rail is cast on the bed. This structure is much more rigid than the CNC machining center with ball or ball guide. However, there are some shortcomings in machining accuracy and production efficiency, but the line CNC machining center. It is too easy to damage when machining large-sized iron parts.
Post time: Aug-10-2018